Creative Team - Leafy Frame Watercolour Card

Leafy Frame Watercolour Card

Creative Team Member - Yoonsun Hur

Hello crafty friends! I’m Yoonsun Hur and so happy to join the Catchy Crafts design team!

My cards today, I’m featuring so beautiful Crafts4u Leafy Rectangle frame die along with other goodies.

Supplies:

Crafts4u Leafy Rectangle Frame Die
Little Birdie Layla Classic Paper Flowers
Crafts4u Double Sided Tape 12mm x 50m
Crafts4u 12mm Foam Tape

Wplus9 Beautiful Bouquets Ranunculus Stamp Set
Altenew Forever and Always Stamp Set
Die Cutting and Embossing Machine
Tsukineko VersaFine pigment ink Smokey Grey
Tsukineko VersaFine pigment ink Onyx Black
Distress Inks in Mermaid Lagoon, Fossilized Amber, Crushed Olive, Worn Lipstick, Festive Berries
Stamping tool
Heat gun
Natural twine

Instructions:

I die cut the Crafts4u Leafy Rectangle from white card stock.

I created my own water coloured floral panel with flower stamp set. I used the Wplus9 Beautiful Bouquets Ranunculus stamp set but you can use any flower set you have! I stamped images onto watercolour paper panel using VersaFine Pigment Ink Smokey Grey, and then loosely water coloured the stamped images with some Distress inks and a wet paint brush.

Once the water coloured panel was completely dry, I placed the floral frame die cut and some paper flowers onto the panel. I love these Little Birdie Flowers so much!!



I mounted the water coloured panel on white card base using Crafts4u double-sided tape first, and then added the floral frame & paper flowers onto the card front using Crafts4u foam tape.



Here is another card with the same way. In my second card, I water coloured the stamped flowers with the red & yellow colours.

Creative Team Cards by Linda

Creative Team Cards by Linda

By Creative Team Member - Linda Drynan

Oceans of Fun

Supplies:

White card stock 12 x 12inch (or a 6 x 6inch blank white card)
Crafts 4 U A5 white card stock
Crafts 4 U leather grain card stock – DarkBlue
Crafts 4 U glitter – B0710 Sky Blue
Crafts 4 U sponge applicator
Black stamp pad
Black fine point pen
Acrylic block for stamping
Distress ink pads – tumbled glass, wild honey, carved pumpkin, shaded lilac, peacock feathers, evergreen bough, shabby shutters and cracked pistachio.
Crafts 4 U die – 10117 Mason Jar
Crafts 4 U die – 10137 Two fish
Crafts 4 U die – 10151 Many line border
Avery Elle stamp set – Bubbles
Nuvo Drops – Wedgewood blue, duck egg blue,simply white.
Crafts 4 U 100mm x 20m double sided adhesive
Die cutting machine
Teaspoon

Owl of Wisdom Tag

Supplies:

1 size 10 tag
Print page from old book
Glue stick and liquid glue
Small piece of black card stock
Wide adhesive tape
Crafts 4 U Mini ink round blending tool and foams
Distress oxides – broken china, faded jeans, blueprint sketch and black soot.
White pigment stamp pad
Finger dauber
Black card stock
Water spritzer
Paper towel or tissue
Favourite stencil
Favourite swirls stamp
Black pen for doodling
Crafts 4 U die 70043 Serious Owl
Cadence liquid pearl  -Sapphire
Stick from the garden!

Creative Team - Early Morning Card

Creative Team - Early Morning Card

By Creative Team Member - Helen Cooke

 

Supplies:

 

Crafts4 U - Lavender Stems #10146

Crafts4 U - Birdcage with Birds #70027

Ivory Card : 120mm x 120mm; 125mm x 125mm; 145mm x 290mm – score and fold in half.

Black Card : 135mm x 135mm; extra black for die cutting.

Distress Oxide Inks : fossilized amber; spiced marmalade; worn lipstick; fired brick.

Stencil : Sunbeam (unknown)

Fine Tip Glue Pen

Double-SidedTape

BlendingTools

 

 

Instructions:

 

Take the smaller ivory card, and blend ‘fossilized amber’ Distress Oxide over entire card.  Next blend ‘spiced marmalade’ through the sunbeam stencil and continue over the ‘fossilized amber’. Starting at the bottom and working your way up, blend ‘worn lipstick’ until it merges with the ‘spiced marmalade’.  Again starting at the bottom, blend ‘fired brick’ about a quarter of the way up until happy with depth of colour.  Finish with a final layer of ‘fossilized amber’ blending all the colours seamlessly.

 

 

From black card and using the Dies, cut two sets of  ‘lavender stems’ and various birds from the ‘birdcage’ die.  Arrange silhouettes and glue into place.

Mat the card front onto ivory, black and folded ivory card to finish as shown.

 

 

 

 

 

Creative Team - Shabby Chic Wedding Card & Box

Shabby Chic Wedding Card & Box

By Creative Team Member - Cheryl Peterie

 

Supplies:

12” x 12” Smooth White Cardstock (x3 sheets)

Craft 4U - Decorative Oval Dies 7006

Craft 4U - Bride & Groom Die 10143

White Paper Flowers

Kaisercraft Miss Betty 6½” Paper Pad

Kaisercraft Decorative Dies & Stamps - Sage & Grace

Archival Ink - Olive & Rose Madder

Distress Ink - Forest Moss

Satin Ribbon

Sticky Pearls

Plastic Acetate 4½” x 5½” piece

Tools

Basic tool kit (trimmer, scissors, double sided Tape, pencil, tweezers etc)

Bone Folder

Glue, Foam Tape

Craft Tray

Flower ShapingKit (optional)

Washi Tape (for holding dies in place)

A4 Die Cutting Machine

Crafters Companion The Ultimate Pro

 

Instructions:

(NB: Nesting dies No.1 being the smallest)

For the Card:

From one of the 12”x 12” sheets cut a 6” x 12” card base fold in half & score.

Roughly colour 28 small white paper flowers with Archival Ink - Rose Madder & a finger dauber, 18 flowers need to be coloured both sides.

To make the buds use the flower shaping kit to shape the flowers by rolling the ball stylus to the centre of the flower repeat with 18 of the double sided coloured flowers (two petals = one bud) apply glue to the centre tips of the petals & pinch to form a ball, add glue to the centre of the second petal as well as the centre tips place the 1st flower ball into the centre & again pinch into a ball repeat to make 9 buds.

To make the roses, place the single sided coloured flowers colour side down & press each petal turn over & press down in the centre of the flower & adhere a bud to the centre.

 

 

Trim the ”Miss Betty”  blue dots Paper  to 5¾” x 5¾” & attach to the front of the card base leaving an even border.

From the cream lacy paper nest the No.2 & No.3. Decorative Oval Dies & cut to make a frame, on the remaining paper stamp the Sage & Grace leaves with Archival Ink - Olive & colour with Distress Ink - Forest Moss & a finger dauber & cut out with the matching die.

From the white glossy doily paper cut the Bride & Groom image.

Use the following pieces from the paper pack.

 

 

Attach the two brackets to the top of the card one lower than the other.

Attach the scallop border to the bottom of the card front.

Attach the tag to the left side & adhere a sticky pearl to the top of the tag, next the circle “XO” under the bottom of the tag.

Adhere the N0.3 frame to the centre of the card front, mount the bride & groom with foam tape to the bottom of the oval frame, mount the “Congratulations” sentiment with foam tape over the tag.

Adhere three leaves, four roses & two buds around the oval frame.

Tie a bow from the satin ribbon & adhere to the left side of the frame under the roses.

 

 

For the Box:

From the other two sheets of 12” x 12” white cardstock cut two 7½” x 7½” squares.

Using the Crafters Companion Ultimate Pro place the base square along the top edge of the box base side & score on the 1st score line repeat on all sides of the box base (it’s a good idea to pencil mark base/lid & erase once assembled), then turn the Ultimate Pro around to the box lid side place the lid square along the top edge & score on the 1st score line repeat on all sides of the lid, make one cut from each corner to form the tabs.

 

 

Place (Do Not Stick) the other full square of the ”Miss Betty”  blue dots Paper  to the front of the box lid, hold in place with washi  tape line up the No. 3 & No. 4 Decorative Oval to cut the hole from the centre (blue frames not used).

Attach the plastic acetate with double sided tape to the front of the lid.

Turn the lid to the inside & adhere the tabs to form a box lid, the same can be done to the base

 

From the other piece of cream lacy paper nest the No.3 & No.4 Decorative Oval Dies & cut to make a frame, only using the outer frame adhere to the acetate inside the oval cut out.

Attach the blue dots Paper to the front of the lid lining up the frame cut out.

Using glue adhere two leaves to the top left corner with one rose & two buds, then gift wrap with extra satin ribbon.

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Creative Team - Love Bird Card

Love Birds Card

By Creative Team Member - Helen Cooke

 



Supplies:

Crafts 4 U Die Cut and Emboss Ornate Heart #10205

Crafts 4 U Wooden Embellishments Feathers #70069

Little Birdie Flowers :‘Argyle Lemon’

Crafts 4 U A5 Glitter Paper - Gold 

Cadence Shake &Gilt : ‘Altin – Gold’

Silks Acrylic Glaze : ‘Emperor’s Gold’

Ivory card

6mm double-sided tape

6mm double-sided foam tape

Glossy Accents

Die Cutting Machine 

 

Instructions:

Take the single piece of ivory card (105mm x 148mm), put inside the Ornate Heart die cut and emboss, and run through the die cutting machine.  This die embosses and cuts at the same time.

Adhere the die cut ivory card to the glitter card using double-side foam tape to add depth.  Using double-sided tape, adhere the glitter card to the folded ivory.

Paint the wooden bird and feather with ‘Emperor’s Gold’ Silks Acrylic Glaze and once dry, spritz with the Cadence Shake & Gilt to add extra shimmer.

Arrange the flowers, feather and bird and when happy with the placement, glue into place with Glossy Accents.  Set aside to allow glue to dry

 

 

 

 

 

 

Creative Team - See the Beauty Mixed Media Art Journal Page

See the Beauty - Mixed Media Art Journal Page

By Creative Team Member - Dani Choate

Supplies:

Cadence Mixed Media Acrylic Spray - light purple
Cadence Diamond Metallic relief paste - mint green
Cadence Matt Shabby Chic relief paste - light mint green
Cadence Liquid Pearls Fluorescent Pink
Cadence Mini hearts stencil - CADMA21
Crafts 4U Leafy Branch Die - 70038
Crafts 4UHoneycomb Chicken wire Frame - 10191
Plain black lightweight card
Plain lemon lightweight card
Plain orange lightweight card
Simply Dies - 3leaves die - SDQZ0025
Simply Dies  -Birds on a Branch die - SDSE7018
Vicky Boutin - All The Good Things paper - Blossom to Awesome
Kaisercraft -Wood veneer Hanging Birdcage - FL544
Rosie's Studio -Wood veneer Whimsy Words
Authentique - 'Petite Diction' sticker words
Lawn Fawn - LawnCuts - Custom craft die - 'i love you'
Little Birdie -Pearl Florettes (Tropical Starburst)
Little Birdie -Pearl Florettes (Celeste)
Little Birdie  -Pearl Florettes (Classic)
Porta Craft - mini rinestones
Dylusions Square Journal
Sakura Pigma Micron pen - .005
450 glue
Tombow Monoliquid glue
Pink thread

Instructions:

- Start with blank double page. You will be working lengthwise within the book.

- Spray and splat Cadence Mixed Media Ink randomly over the page

- Once dry, tape the Cadence heart stencil (MA21) so that the bottom edge will not be even

- Stencil down the middle of the journal page using Cadence Style Matt relief paste in light mint green

- Die cut - 3x leafy branch die (in black)

                   - 2x leaf die (in black)

                   - 1x honeycomb frame die (in orange)

                   - 1x honeycomb frame die (in lemon)

                   - 2x Lawn Cuts 'i love you' die (in black)

                   - 1x bird on a branch (in black)

- Fussy cut a number of flower clusters out of the Vicki Boutin paper and some extra leaves

- Arrange the flowers from the paper and pop-up some with dimensional tape and attach down to the page

- Slide black leaves and fronds underneath and around the flowers

- Cut small sections of honeycomb frame in orange and yellow and add these underneath as well, stepping each colour three times around the cluster

- Add the wood veneer title, along with the 'Petite Diction' phrase line running along the bottom line of the title

- Sit and glue one single black bird on the top side of the phrase line

- Attach a few random colours of Little Birdie small florette flowers

- Use one 'i love you' die cut and remove the end wave from it. Use it to lengthen the other 'i love you' die cut - this will be what your hanging birdcage will be attached to

- Lightly glue the long 'i love you' die to the birdcage and glue the birdcage onto the right hand page - As we are working lengthwise this will actually be the bottom page

- Use a teardrop (or any single row linear stencil) to add mint green Diamond Paste teardrops falling from the flower cluster

- Use Cadence coloured pearls to represent strings of beads falling from the bushes - also add some dots at the top of the page

 *** WAIT FOR THESE TO DRY ***

- Attach rhinestones similarly alongside these other elements

- Make sure raindrops, beads and rhinestones are staggered in length

- Stuff a tangled nest of pink thread under the bottom edge of the entire cluster

- Add rhinestones to the birdcage, the 'i' in the 'i love you' die element & on the 'i' in the title

- Finally hand write the quote that ties all the elements together

" I don'task for the meaning of the song of a bird

or the rising of the sun on a misty morning.

There they are, and they are beautiful"

                                                -Pete Hamill