Creative Team - In the Garden Step Card

Creative Team - In the Garden Step Card

by Creative Team Member Cheryl Peterie

 

Supplies:

Spellbinders Card Creator Step Card Gift Of Happiness S7203

Crafts4U Die Garden Scene 10119

Crafts4U Die Stacking Tags (11 dies) 70060

Crafts4U 6mm x 50m Double Sided Tape 30008

Crafts4U 12mm x 4m Foam Tape 2mm thick 30004

Crafts4U A5 White 20 Pack 230gsm 60037

Little Birdie Micro Jeweled Florettes Classic Cream 60pk CR63277

Kaisercraft Paper Pad 6.5 X6.5in 40/pk Pen & Ink PP1041

Pen & Ink Collectables Cardstock Die Cuts CT934

Kaisercraft 12" x 12" Cardstock - Mocha & Brown

Distress Pad Peacock Feathers

Distress Pad Peeled Paint

Portacraft Ribbon

 

Tools:

Basic tool kit (Crafts4U trimmer, scissors, Crafts4Udouble sided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine.

 

 

 

 

Instructions:

 

First die cut the Spellbinders step card template on to the Mocha cardstock fold & score all the marked lines

 

Locate the background paper & the "Happy Birthday" sentiment from the Pen & Ink Paper Pad & the "Remember" sentiment from the Pen & Ink Collectables Pack.

 

Die cut the rectangle panel from the Spellbinders card creator set & the No.2 Tag from the Crafts4U Stacking Tags Set as pictured (NB: leaving the space next to the tag for bird house & the birds wings). From the same paper using a paper trimmer cut three panels measuring (front step 2cm x 8cm), (middle step 3.1cm x 8cm) & (back step 4.3cm x 8cm) & attach all panels to the step card. Die cut the tree, bird house base & roof from a piece of brown cardstock & assemble the bird house.

From a piece of leftover background paper pre-colour with Distress Inks - Peeled Paint & Peacock Feathers, die cut several leaves & two birds adhering the wings on to the front of the birds.

From a piece of A5 White card die cut two of the picket fence cutting one in half as shown in picture, using glue adhere the tree to the left panel then all of the fence pieces.

 

 



This is all the pieces ready to assemble

 

Adhere the leaves & five flowers over the tree, then four flowers along the front fence, attach the floral tag & the "Remember sentiment to the back step with one flower then using foam tape mount the birds & bird house to the left panel.

 

Created By: Cheryl Peterie for Catchy Crafts

 

 

 

 

 

 

 

 

 

Creative Team Semi Truck Card

Creative Team - Semi Truck Card

by Creative Team member - Dani Choate

Supplies:

Crafts 4U Truck Die - 10131

Crafts 4U Bronze Glitter Card

Crafts 4U Double sided tape
Crafts 4U foam tape
Crafts 4U Kraft card stock
black glossy card stock
Simply Dies Stitched Rectangles Die- SDHX0048
Kaisercraft - Sticker sheet 'FACTORY-42' - title
Scrapbook Adhesives - black foam squares
Kmart - Sliver metallic book covering (Contact)

alternatively:

Darice - Diamond Plate embossing plate
Crafts4U - Sliver metallic card

Instructions:

Cut a card base using Kraft card stock

Cut a Stitched Rectangle die cut from the Silver metallic card stock  - (do this after embossing with the diamond plate pattern)

Cut a rectangle by hand out of the Bronze glitter card stock just slightly larger than the stitched silver rectangle

Cut a semi-trailer truck die from black gloss card stock

Mount the silver card onto the glitter card stock using strong double sided tape

Pop the bronze glitter card stock up with foam tape to the kraft card base

 

 

 

 

 

 

June class roundup

More great classes from our talented teachers, showcasing new products and techniques:

Mixed media pages by Dani

MFT shaker cards by Cookie

Lawn Fawn cards by Kelly

Cards by Fran

Lawn Fawn Glow in the Dark cards by Kelly

Scrapbooking by Janice

Scrapbooking by Janice

Scrapbooking by Peta

Art journal by Peta

Handmade flower cards by Peta

Watercolour cards by Cookie

Creative Team Vintage Dreams Easel Card

Creative Team - Vintage Dreams Easel Card

By Creative Team Member - Cheryl Peterie

 

Supplies:

 

Crafts4U A5 White 20 Pack 230gsm 60037

Crafts4U 100mm x 20m Double Sided Tape 30010 (aka toilet roll)
Crafts4U 6mm x 50m Double Sided Tape 30008
Crafts4U 12mm x 4m Foam Tape 2mm thick 30004
Crafts4U Die Diamond Frame 10193
Crafts4U Die Stacking Tags (11 dies) 70060
Crafts4U Die Lamp Post 70010
Crafts4U Ultra Fine Glitter Black 20g Jar
Little Birdie Renae Dusty Rose 27pk CR63046
Kaisercraft Paper Pad 6.5 X6.5in 40/pk Pen & Ink PP1041
Pen & Ink Collectables Cardstock Die Cuts CT934
Distress Pad Frayed Burlap
Crafts4U 2 x Mini Ink Round Blending Tools with 4 Foams 10053
12" x 12" Brown Cardstock
Porta Craft Ribbons

Tools

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U doublesided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine, Paper Distresser.

 

 

Instructions

Start with a base of brown cardstock measuring 10cm x 30.5cm, fold in half & score then fold the left  edge to the centre line & score again, next cut a 10cm x 15.3cm background mat.

 

 

Place some double sided tape on the front panel as shown & attach the background mat to the base card.

 

Die cut the Diamond frame on to a piece of A5 white card, cut off the right side & lightly blend with Distress Ink - Frayed Burlap.

From the Pen & Ink paper pad cut a background panel to 9.7cm x15cm distress the edges & blend with Distress Ink - Frayed Burlap, adhere the cut piece of diamond frame using glue only along the border edges. Attach a piece of ribbon along the bottom then attach the panel to the card front.

Base Stopper

·         Cut a 4.2cm x 5.8cm panel from a leftover piece of the same paper used as background(NB: pattern will be in different direction) distress & blend the edges.

·         Cut a 4.6cm x 9.2cm mat from the coordinating paper pad

      ·          Cut a 5.2cm x 10cm mat from the brown cardstock.

Adhere the above three panels to each other leaving an even border & attach to the inside base.

Apply some 100mm x 20mm double sided tape to the A5 - White Card die cut the lamp post (a shim maybe needed due to the thickness of the tape & card) Peel the backing off the tape side, using a craft tray apply the black glitter & tap off excess

(NB; with nesting dies No.1 being the smallest) 

·         Die cut the No.3 Tag from the same paper as the base stopper mat & tie a piece of ribbon through the hole.

·         Using foam tape mat the "Best wishes" sentiment(from the paper pad) onto a piece of brown cardstock & place more foam tape on the back to give extra height.

         ·          Distress the edges of the bingo card(from the collectables pack) & attach to a brown mat also distressing the edges.
         ·          Place some foam tape to the back of the clock(from the collectables pack) & the "for someone very special" sentiment (from the paper pad).

 

Attach the tag under the diamond frame, then attach the bingo card & clock over the top on an angle. Mount the lamp post with foam tape & place to the left of the clock, next adhere one flower & two leaves from the Little Birdie Renae - Dusty Rose flower pack.

 

Last mount the "Best wishes" sentiment to the card front & the "for someone very special" sentiment to the base stopper. (NB: cream coloured copy paper can be used as an insert)

Created by Cheryl Peterie for Catchy Crafts

 

 

 

 

 

 

 

 

 

Creative Team Where the Wind Takes You Card

Creative Team Where the Wind Takes You Card

by Creative Team member Helen Cooke

Supplies:

Crafts 4 U Die Classic Airplane

Crafts 4 U Die Clouds

Crafts 4 U Glitter Card Royal Blue

smooth white card; textured card; silver card

Carpe Diem : Posh – word label stickers

Distress Ink : chipped sapphire & stormy sky

Crafts 4 U Fine Tip Glue Pen

Crafts 4 U Double sided tape

Crafts 4 U Double sided foam tape

 

Instructions:

In order to determine how I wanted the airplane to look, I cut it three times using silver card, blue glitter card and white glitter card.  I collected each of the negative pieces from all three cards, and re-inserted them, mixing up the different colours.   I put double sided tape on the back of the frames to keep the negative pieces in place and put the three airplanes aside until the card background was finished.

 

From smooth white card, I cut a 130mm x 130mm square.  On my craft mat, I inked up chipped sapphire and stormy sky Distress Ink, spritzed it with water and then dragged and twisted the square of white card through it.  After leaving it to dry for a few minutes, I again smooshed the card through the remainder of the Distress Ink which gives more of a splatter pattern.  I edged the four sides of the card with chipped sapphire and then put it aside to dry.

The co-ordinating mats were cut from silver card (135mm x 135mm) and blue textured card (140mm x 140mm).  These mats were adhered to folded white card (290mm x 45mm).

I cut a selection of clouds from white card, choosing a couple of them to adhere to the top of the background .  From the three airplanes put aside earlier, I chose the silver bodied one and adhered it below the clouds with double sided foam tape.

I found an appropriate quote from the word label stickers, cut them into three sections and with a fine black pen, drew a line around each one.

Each background made using the above technique is unique – no two will ever be the same.  This particular background  reminds me of an approaching storm. 

Thank you for visiting today, comments are always appreciated – HAPPY CRAFTING!

 

 

Creative Team Glitter Bicycle Card

Creative Team Glitter Bicycle Card

By Creative Team member Yoonsun Hur

Supplies:

C4UBicycle Die 70072
C4U Microfine Glitter: Yellow Rainbow, Laser Lime Green, Laser Pink, Laser Purple
Crafts 4U 12mm Double Sided Tape
Crafts 4U Fine Tip Glue Pen
Rosie’s Whimsy Words Wood Veneer

Instructions:

Tape diagonally on white card base using double-sided tape.

Apply glitters on the sticky stripes of the card base using C4U Microfine Glitter: (from the top) Yellow Rainbow, Laser Lime Green, Laser Pink, Laser Purple

Die cut bicycle from white card stock using the C4U Bicycle Die 3 times, stack them up using fine tip glue pen.

Mount the bicycle die cut & wood veneer sentiment using fine tip glue pen.

Add some enamel dots for finishing touches.


Thank you so much for stopping by. Happy crafting!

Hugs,
Yoonsun