Creative Team - Leave a Little Sparkle Card

Creative Team - Leave a Little Sparkle Card

By Creative Team Member Cheryl Peterie

 

 

Supplies:

Crafts4U A5 White 20 Pack 230gsm 60037

Crafts4U A5 Glitter Soft Pink 10 Pack 60021

Crafts4U Die Claudie Butterfly Small 70047

Crafts4U Die Decorative Oval (4 dies) 70063

Cadence Dora 3D Paint 5176 Candy Floss

Kaisercraft 12"x12" Fairy Garden Collection - Fluttering

Kaisercraft 12"x12" Fairy Garden - Sticker Sheet

Kaisercraft Collectables Fairy Garden Pkt

3/8” White Satin Ribbon

Crafts 4 U Double Sided Tape

Crafts 4 U Foam Tape

Crafts 4 U Paper Distresser Tool

 

Basic tool kit (trimmer, scissors, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine.

 

 

 

Instructions:

 

First locate the two flower cut-outs from the Kaisercraft Collectables Fairy Garden Pkt & apply the Cadence Dora 3D Paint Candy Floss as tiny dots to the centres & set aside to dry.

 

Fold a piece of A5 White card in half & score in the portrait position, cut a 10.3cm x 14.3cm  panel from the Fairy Garden Collection - Fluttering (butterfly side) distress the edges & attach to the card front.

(NB; with nesting dies No.1 being the smallest)

From a piece of A5 white card die cut the No.5 Decorative Oval to make the frame base.

From the Fairy Garden Paper Collection - Fluttering (green side) die cut the No.4 & No.5

Decorative Oval together to make a frame (centre cut out not used), adhere the frame to the white base oval die-cut, attach the "Leave A Little Sparkle" sentiment from the Fairy Garden - Sticker Sheet to the centre.

Die cut the small Claudie Butterfly from a piece of Glitter Soft Pink & a piece of white

Card, adhere the white body to the pink leaving the wings free.

 

Mount the Decorative Oval frame using foam tape to the card front, next mount one set of the flowers with the leaves to the top right side of the oval, choose another two sets of leaves from the Collectables Fairy Garden Pkt & adhere them to the bottom left side of the oval then mount the remaining flowers over the leaves.

 

To finish place the Claudie Butterfly to the top left side of the oval & a bow to the bottom right side of the oval.

 

Come Back next Monday to see two more cards created by Cheryl using more pieces from this range

 

 

 

 

 

 

 

 

 



Creative Team - Shabby Chic Wedding Card & Box

Shabby Chic Wedding Card & Box

By Creative Team Member - Cheryl Peterie

 

Supplies:

12” x 12” Smooth White Cardstock (x3 sheets)

Craft 4U - Decorative Oval Dies 7006

Craft 4U - Bride & Groom Die 10143

White Paper Flowers

Kaisercraft Miss Betty 6½” Paper Pad

Kaisercraft Decorative Dies & Stamps - Sage & Grace

Archival Ink - Olive & Rose Madder

Distress Ink - Forest Moss

Satin Ribbon

Sticky Pearls

Plastic Acetate 4½” x 5½” piece

Tools

Basic tool kit (trimmer, scissors, double sided Tape, pencil, tweezers etc)

Bone Folder

Glue, Foam Tape

Craft Tray

Flower ShapingKit (optional)

Washi Tape (for holding dies in place)

A4 Die Cutting Machine

Crafters Companion The Ultimate Pro

 

Instructions:

(NB: Nesting dies No.1 being the smallest)

For the Card:

From one of the 12”x 12” sheets cut a 6” x 12” card base fold in half & score.

Roughly colour 28 small white paper flowers with Archival Ink - Rose Madder & a finger dauber, 18 flowers need to be coloured both sides.

To make the buds use the flower shaping kit to shape the flowers by rolling the ball stylus to the centre of the flower repeat with 18 of the double sided coloured flowers (two petals = one bud) apply glue to the centre tips of the petals & pinch to form a ball, add glue to the centre of the second petal as well as the centre tips place the 1st flower ball into the centre & again pinch into a ball repeat to make 9 buds.

To make the roses, place the single sided coloured flowers colour side down & press each petal turn over & press down in the centre of the flower & adhere a bud to the centre.

 

 

Trim the ”Miss Betty”  blue dots Paper  to 5¾” x 5¾” & attach to the front of the card base leaving an even border.

From the cream lacy paper nest the No.2 & No.3. Decorative Oval Dies & cut to make a frame, on the remaining paper stamp the Sage & Grace leaves with Archival Ink - Olive & colour with Distress Ink - Forest Moss & a finger dauber & cut out with the matching die.

From the white glossy doily paper cut the Bride & Groom image.

Use the following pieces from the paper pack.

 

 

Attach the two brackets to the top of the card one lower than the other.

Attach the scallop border to the bottom of the card front.

Attach the tag to the left side & adhere a sticky pearl to the top of the tag, next the circle “XO” under the bottom of the tag.

Adhere the N0.3 frame to the centre of the card front, mount the bride & groom with foam tape to the bottom of the oval frame, mount the “Congratulations” sentiment with foam tape over the tag.

Adhere three leaves, four roses & two buds around the oval frame.

Tie a bow from the satin ribbon & adhere to the left side of the frame under the roses.

 

 

For the Box:

From the other two sheets of 12” x 12” white cardstock cut two 7½” x 7½” squares.

Using the Crafters Companion Ultimate Pro place the base square along the top edge of the box base side & score on the 1st score line repeat on all sides of the box base (it’s a good idea to pencil mark base/lid & erase once assembled), then turn the Ultimate Pro around to the box lid side place the lid square along the top edge & score on the 1st score line repeat on all sides of the lid, make one cut from each corner to form the tabs.

 

 

Place (Do Not Stick) the other full square of the ”Miss Betty”  blue dots Paper  to the front of the box lid, hold in place with washi  tape line up the No. 3 & No. 4 Decorative Oval to cut the hole from the centre (blue frames not used).

Attach the plastic acetate with double sided tape to the front of the lid.

Turn the lid to the inside & adhere the tabs to form a box lid, the same can be done to the base

 

From the other piece of cream lacy paper nest the No.3 & No.4 Decorative Oval Dies & cut to make a frame, only using the outer frame adhere to the acetate inside the oval cut out.

Attach the blue dots Paper to the front of the lid lining up the frame cut out.

Using glue adhere two leaves to the top left corner with one rose & two buds, then gift wrap with extra satin ribbon.

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Creative Team - Mint Rose Decorative Ovals

Our First of this months Creative Team projects has been put together for you by Cheryl Peterie and uses the C4U Decorative Oval Die set and the C4U Delicate Frame Embossing Folder to cerate a beautiful layered card.

Mint Rose  Decorative Ovals Card

Products Used:

Crafts 4U - A5 White Card (two pieces)

Crafts 4U - A5 Glitter WhiteCard

60025 Embossing Folder -Delicate Fame

7006 Decorative Oval Dies

Kaisercraft Decorative Dies & Stamps -Decor Frames & Quotes

Heartfelt Creations HCPC-3753Classic Rose Vine Stamp  

Heartfelt Creations HCD1-7111Classic Rose Vine Die

Memento Ink - Tuxedo Black

Distress Inks - Shabby Shutters & Forest Moss

Archival Inks - Watering Can & Viridian

Little Birdie Handmade Flowers

Satin Ribbon

 

Tools:

 

Basic tool kit (trimmer, scissors, double sided tape, pencil, tweezers etc), Bone folder, Glue, Foam Tape, Craft Tray, Flower Shaping Kit (optional), Washi Tape (for holding dies in place), Die Cutting Machine

 

Instructions:

 

On a piece of A5 white card stamp the Classic Rose Vine Stamp with Memento Ink - Tuxedo Black & colour using a finger dauber with Distress Inks - Shabby Shutters & Forest Moss, cut out with the Heartfelt Creations HCD1-7111 Classic Rose Vine Die, (optional: shape the leaves with a flower shaping tool).

 

On the left over A5 white card stamp the Kaisercraft Decor Frame with Archival Ink - Watering Can, next stamp the sentiment from the same set with Archival Ink - Viridian & cut out with the matching die.

 

 

Take a piece of A5 - White Card fold in half & score, emboss the front panel with the Delicate Fame Embossing Folder.

From a piece of the A5 - Glitter White Card cut out the three largest DecorativeOvals (use a piece of washi tape to hold dies in place).

 

Attach the middle oval with double sided tape to the centre of the card front, next mount the largest oval with foam tape over the top, next mount the smaller oval to the centre.

 

Using glue adhere the Rose Vine to the left side of the card.

Attach the sentiment frame on an angle to the right side of the vine.

Using glue adhere the rose to the bottom of the vine.

Tie a bow with the satin ribbon & adhere to the bottom of the rose.