Creative Team Lacey Oxide Butterflies

Creative Team Lacey Oxide Butterflies

by Cheryl Peterie

 

 

Supplies:



Crafts4U A5 White 20 Pack 230gsm 60037

Crafts4U Wooden Embellishments Butterflies 14pk 70066

Crafts4U Embossing Folder Tiny Dots 10112

Crafts4U Die Lacey Border 3 10161

Crafts4U Die Layered Frame 1 (4 dies) 10195

Tim Holtz Distress Oxide Ink Pad Broken China TDO55846

Distress Pad Walnut Stain

Crafts4U Round Ink Blending Tools 2 Tools with 4 Foams 10053

Crafts4U 12mm x 4m Foam Tape 2mm thick 30004

Little Birdie Curly Rose Yellow 12pk CR62800

Distress Paint - Walnut Stain

Kaisercraft 12x12 Paper - Chartreuse

Kaisercraft Paper Pad 6.5 X6.5in 40/pk Pen & Ink PP1041 (for sentiment tag)

Twine

Border Sticker

Sticky Pearl Strip

Any Background Stamp of choice

 

Tools

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U double sided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine, Small Hole Punch.

 

 

Instructions

Start by painting two solid butterflies with the Distress Paint Walnut Stain & set aside to dry, leave the third butterfly raw, when dry stamp your desired pattern stamp with Distress Oxide Ink - Broken China on all three butterflies.

 

 

 

 

1.        Fold & score a piece of A5 White card in half for the base card.

2.       Cut a background piece of White card to 10cm x 14.5cm, blend the edges with Distress Oxide Ink -Broken China & attach to the base card.

3.       Cut a piece of White card to 9.5cm x 14cm, emboss with the Crafts4U Embossing Folder Tiny Dots & attach to the base card leaving an even border.

4.       From the Chartreuse pattern paper die cut the Crafts4U Die Lacey Border 3 & the No.2 label from the Crafts4U Die Layered Frame 1 set.

5.       Attach the lacey border to the left side of the card front, mount the label with foam tape to the centre of the card front.

6.       Attach the border sticker & the strip of sticky pearls along the lacy border.

7.       Punch a hole in the top of the sentiment tag, Distress the edges with Distress Ink - Walnut Stain, add some twine & mount with foam tape to the card front.

8.       Adhere the three butterflies to the card front with glue, placing a small flower bud to the centre butterfly.

 

 

 

 

 

 

 

 

Creative Team Vintage Butterflies & Lace Card

Creative Team Vintage Butterflies & Lace Card

by Cheryl Peterie

 

 

Supplies:

Crafts4U A5 Black 20 Pack 230gsm 60039

Crafts4U A5 White 20 Pack 230gsm 60037

Crafts4U Ultra Fine Glitter Black 20g Jar

Crafts4U 100mm x 20m Double Sided Tape 30010 (aka toilet roll)

Crafts4U 12mm x 4m Foam Tape 2mm thick 30004

Crafts4U Die Lacey Border 3 10161

Crafts4U Die Layered Frame 1 (4 dies) 10195

Crafts4U Die Claudie Butterfly Small 70047

Little Birdie Curly Rose Yellow 12pk CR62800

Distress Pad Walnut Stain

Crafts4U Round Ink Blending Tools 2 Tools with 4 Foams 10053

Kaisercraft 12 x 12 Paper - Chartreuse

Kaisercraft 12 x 12 Paper - Commitment

Sticky Pearl Strip

Lace

 

 

Tools

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U double sided Tape, pencil, tweezers etc),Die Cutting/Embossing Machine, Washi Tape (for holding dies in place), Paper Distresser.

 

 

 

 

Instructions:

 Fold & score a piece of A5 Black card in half as the base card, cut a 10cm x 14.5cm background mat from the Commitment paper (script side) distress the edges & lightly blend with Distress Ink pad - Walnut Stain then attach to the front of the base card.

 

(NB; with nesting dies No.1 being the smallest)

·         From the Chartreuse paper (yellow side wide enough for half see picture) die cut the Crafts4U Die Lacey Border 3 & the No.1 label from the Crafts4U Die Layered Frame 1 (4 dies)

·         From the Commitment paper (floral side) die cut the No.2 label

·         Attach some Crafts4U 100mm x 20m Double Sided Tape 30010 (aka toilet roll) to a piece of the A5 White card & die cut the small solid Claudie Butterfly, peel off the backing paper & add the Crafts4U Ultra Fine Glitter Black tap off excess & repeat so you have two Butterfly bases.

·         From the Commitment paper (floral side) die cut the two matching Claudie Butterfly & adhere these to the two solid butterflies leaving the wings free.

 

 

 

To make the tag cut a background piece of the Commitment paper (floral side) to 7.5cm x 15cm , cut the Chartreuse paper (yellow side) to 6.8cm x 11.3cm distress the edges of both pieces & blend with Distress Ink - Walnut Stain, adhere the yellow piece to the floral piece then add the Lacey border to the back at the bottom of the tag, punch a hole in the top & tie a piece of lace in a bow next attach the tag on an angle to the card front.

 

1.       Attach the No.1 yellow label to the No.2 floral label & mount with foam tape to the centre of the tag making this straight.

2.       Mat the Birthday sentiment on a piece of black card leaving an even border, cut a notch in one end to make a flag, tie a piece of twine around the end & mount with foam tape to the centre of the label.

3.       Adhere the three flowers to the top near the bow & three flowers to the bottom right corner of the tag.

4.       Place a strip of sticky pearls along the bottom of the tag.

5.       Last adhere the two butterflies.

 

 

 

 

 

 

 

 

 



Creative Team Vintage Dreams Easel Card

Creative Team - Vintage Dreams Easel Card

By Creative Team Member - Cheryl Peterie

 

Supplies:

 

Crafts4U A5 White 20 Pack 230gsm 60037

Crafts4U 100mm x 20m Double Sided Tape 30010 (aka toilet roll)
Crafts4U 6mm x 50m Double Sided Tape 30008
Crafts4U 12mm x 4m Foam Tape 2mm thick 30004
Crafts4U Die Diamond Frame 10193
Crafts4U Die Stacking Tags (11 dies) 70060
Crafts4U Die Lamp Post 70010
Crafts4U Ultra Fine Glitter Black 20g Jar
Little Birdie Renae Dusty Rose 27pk CR63046
Kaisercraft Paper Pad 6.5 X6.5in 40/pk Pen & Ink PP1041
Pen & Ink Collectables Cardstock Die Cuts CT934
Distress Pad Frayed Burlap
Crafts4U 2 x Mini Ink Round Blending Tools with 4 Foams 10053
12" x 12" Brown Cardstock
Porta Craft Ribbons

Tools

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U doublesided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine, Paper Distresser.

 

 

Instructions

Start with a base of brown cardstock measuring 10cm x 30.5cm, fold in half & score then fold the left  edge to the centre line & score again, next cut a 10cm x 15.3cm background mat.

 

 

Place some double sided tape on the front panel as shown & attach the background mat to the base card.

 

Die cut the Diamond frame on to a piece of A5 white card, cut off the right side & lightly blend with Distress Ink - Frayed Burlap.

From the Pen & Ink paper pad cut a background panel to 9.7cm x15cm distress the edges & blend with Distress Ink - Frayed Burlap, adhere the cut piece of diamond frame using glue only along the border edges. Attach a piece of ribbon along the bottom then attach the panel to the card front.

Base Stopper

·         Cut a 4.2cm x 5.8cm panel from a leftover piece of the same paper used as background(NB: pattern will be in different direction) distress & blend the edges.

·         Cut a 4.6cm x 9.2cm mat from the coordinating paper pad

      ·          Cut a 5.2cm x 10cm mat from the brown cardstock.

Adhere the above three panels to each other leaving an even border & attach to the inside base.

Apply some 100mm x 20mm double sided tape to the A5 - White Card die cut the lamp post (a shim maybe needed due to the thickness of the tape & card) Peel the backing off the tape side, using a craft tray apply the black glitter & tap off excess

(NB; with nesting dies No.1 being the smallest) 

·         Die cut the No.3 Tag from the same paper as the base stopper mat & tie a piece of ribbon through the hole.

·         Using foam tape mat the "Best wishes" sentiment(from the paper pad) onto a piece of brown cardstock & place more foam tape on the back to give extra height.

         ·          Distress the edges of the bingo card(from the collectables pack) & attach to a brown mat also distressing the edges.
         ·          Place some foam tape to the back of the clock(from the collectables pack) & the "for someone very special" sentiment (from the paper pad).

 

Attach the tag under the diamond frame, then attach the bingo card & clock over the top on an angle. Mount the lamp post with foam tape & place to the left of the clock, next adhere one flower & two leaves from the Little Birdie Renae - Dusty Rose flower pack.

 

Last mount the "Best wishes" sentiment to the card front & the "for someone very special" sentiment to the base stopper. (NB: cream coloured copy paper can be used as an insert)

Created by Cheryl Peterie for Catchy Crafts