Creative Team - Boutique Elegance Card

Creative Team - Boutique Elegance Card

By Cheryl Peterie

Products Used

Crafts4U 12 x 12 Weave White 10 Pack 230gsm 60052

Crafts4U Die Layered Frame 2 (7 dies) 10196

Crafts4U Die Manequins (2 dies) 10144

Little Birdie Carol Blush 6pk CR63101

Little Birdie Curly Rose Pink 12pk CR62801

Crafts4U Embossing Folder Tiny Dots 10112

Distress Pad Spun Sugar

Memento Ink Pad Tuxedo Black

Crafts4U Finger Tip Sponge Daubers 5 Pack 10029

Kaisercraft Miss Betty Collection 12" x 12" Paper - Stitched

Kaisercraft Miss Betty Collection 12" x 12" Paper - Tapestry

AC Cardstock 12" x 12" - Rain (or pale Blue)

Sticky Pearl Strip 

1/4" Satin Ribbon - White

Sentiment Stamp of choice (pictured is Kaisercraft Happy Birthday)

 

 

 

Tools

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U double sided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine.

Instructions

(NB; with nesting dies No.1 being the smallest)

Die-cut the following pieces

·         Rain Cardstock - Layered Frame & the No.4 Oval (emboss the oval with the Tiny Dots folder)

·         Pattern Paper - Tapestry - No.2 Mannequin (largest) I used the bottom left corner of the paper place a tiny strip of pearls around the neck.

 

 

Cut the base card from the 12" x 12" White cardstock measuring 15cm x 21cm fold in half & score, cut a pattern background panel to 10cm x 14.5cm & attach to the card front.

 

Using a fine tip glue adhere the frame die-cut to the pattern panel.

 

Trim the small rose stems & wrap one of the stems around to secure all three & adhere with glue to the card front, Attach the Mannequin to the embossed oval & mount using foam tape to the card front.

Using glue adhere the large flower over the stems of the small roses & a small bow in between.

Stamp a sentiment onto a piece of leftover cardstock, cut into a banner & blend the edge with Distress Ink - Spun Sugar, place a piece of foam tape to the middle of the banner & glue either end down slightly curling the right end up.

 

Created by: Cheryl Peterie

 

 

 

 

 

 

 

 

 

Creative Team Blue Post Easel Card

Creative Team Blue Posy Easel Card

by Cheryl Peterie

Supplies:

Crafts4U Die Precious Petals (6 dies) 10185

Crafts4U Die Decorative Oval (4 dies) 70063

Crafts4U Die Leafy Branch 70038

Prills 3oz Lettuce Entertain You PRILLS 814

Distress Pad Stormy Sky

Crafts4U Mini Round Foam Inking Tool (2 pk / 4 foams) 10210

12" x 12" Smooth White Card stock

Kaisercraft Cardstock - Forest

Kaisercraft Cardstock - Navy

Kaisercraft - Wandering Ivy 12" Paper Pack

Kaisercraft -Wandering Ivy 6½" Paper Pad

Navy Satin Ribbon

White Lace

Flower Shaping Kit

Tools

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U double sided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine.

 

Instructions

(NB; with nesting dies No.1 being the smallest)

Cut a white card base to 12" x 6" fold in half to a 6" x 6" square & score, open out flat then fold the left side to the centre fold line to create the easel fold.

 

 Die cut the following pieces

·         No.5 & No.4 Decorative Ovals to make a frame from white cardstock.

·         No.1 Decorative Oval from a piece of pattern paper blend the edge of this oval with Distress Ink-Stormy Sky.

To make the large flower die cut the following petals from the same paper as the No.1 oval & blend with Distress Ink - Stormy Sky, once cut & blended assemble & add prills to the centre

·         Two - No.5 petals

·         One - No.3 petal

·         One No.2 petal (cut an extra one for the single flower)

·         Two No.1 petals shape & form into a bud

Navy Cardstock - die cut two No.2 petals shape & form into a bud, die cut four No.1 petals shape leave single & add prills to the centres. (Best Wishes sentiment pictured instead of Wishing You)

 

Cut the following pieces

1.       Background panel to fit the inside base of the card leaving an even border.

2.       Cut from the same paper as above a 7.3cm x 15cm & attach to the top panel of the card front.

3.       Cut from the floral paper 7.3cm x 15cm & attach to the bottom panel on the card front

4.       Cut a 1cm x 15cm strip of navy cardstock.

5.       Cut a 1cm x 15cm floral strip.

6.       Cut a 15cm piece of lace & attach pieces 4, 5 & 6 to the bottom of the inside base panel.

 

 

Attach the pattern decorative oval to the white decorative oval, next attach the "Best things in Life" sentiment to the centre of the ovals & adhere two small navy flowers to the bottom corner of the sentiment, then using foam tape mount to the inside background panel to make the base stopper.

 

 

 

Attach the bottom half of the decorative oval frame to the bottom panel of the card front, add the leaves, flowers, buds, sentiment & to finish tie a bow from the satin ribbon dove tail the ends & adhere to the bottom of the flowers.

 

 

 

 

 

 

 

 

Creative Team Lacy Floral Blooms Card

Creative Team Lacy Floral Blooms Card

by Cheryl Peterie

 

Supplies:

Crafts4U 12 x 12 Weave White 10 Pack 230gsm 60052 (1/2 a sheet)

Crafts4U Die Precious Petals (6 dies) 10185

Crafts4U Die Leafy Branch 70038

Crafts4U 12mm x 50m Double Sided Tape 30009

Crafts4U 12mm x 4m Foam Tape 2mm thick 30004

Crafts4U Round Ink Blending Tools 2 Tools with 4 Foams 10053

Crafts4U Edge Distresser 10110

Distress Pad Stormy Sky

Prills 3oz Lettuce Entertain You PRILLS 814

Heartfelt Creations Deluxe Flower Shaping Kit HCST1401

Kaisercraft Paper Pad 6½"  - Wandering Ivy

Kaisercraft Collectables Pack - Wandering Ivy

Kaisercraft Sticker Sheet - Wondering Ivy

Kaisercraft Cardstock - Forest & Navy

Stamens - Green

Satin Ribbon - Navy

Lace - White

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U double sided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine.

 

 

 

 

Instructions:

 

Cut the following pieces

White Cardstock (card base) - cut a 6" x 12" card base fold in half & score to form a 6" x 6" square.

Forest Cardstock (background mat) - cut a 5¾" x 5¾" & a 3¼" x 3¼" distress the edges of both mats.

Navy Cardstock - ½" x 5½" strip.

Lace - 5½"

Pattern Paper (background) - 5½" x 5½" & a 3" x 3" distress the edges of both backgrounds.

Attach the pattern pieces to the background mats leaving an even border, next attach the large background to the front of the card, then the small mat to the card front, add the navy strip, the scallop lace sticker (from sticker sheet) & the white lace to the left side of the card front.

 

To make the flowers

(NB; with nesting dies No.1 being the smallest) 

Die-cut the following pieces for all flowers (pattern & navy), individual pictures show what petals are needed for each flower.

Navy cardstock

·         Two - No.6 petals

·         Three - No.4 petals

·         Two - No.3 petals

·         Two - No.1 petals

Pattern Paper (not pictured with dies) lightly blend the entire petal with Distress Ink - Stormy Sky

·         Two - No.4 petals 

·         One - No.3 petal 

·         One - No.2 petal

·         One - No.1 petal

Forest Cardstock - one Leafy Branch & cut in to four pieces.

Shape all the petals using the Heartfelt Creations Deluxe Flower Shaping Kit 

 

 

Two No.4 & One No.3 Petals to make the medium navy flower

Large Navy Flower: Offset & adhere the two No.6, No.4 & No.3 petals together, pierce a hole through the centre & add the stamens, apply dries clear glue to both sides of the hole to secure the stamens when dry cut off the stems at the back of the flower.

Medium Navy Flower: Adhere the two No.4 & No.3 petals together & shape into a bud.

Medium Pattern Flower: Offset & adhere the two No.4 petals & the No.3 petal, adding prills to the centre

Single Flowers: Shape & add prills to the centres.

 

I have used the "Best Wishes" tag from the paper pad & the clock from the collectables pack, tie a piece of satin ribbon through the top of the tag using foam tape mount to the card front, next attach the clock then to finish adhere the leaves & flowers.

 

 

Created by Cheryl Peterie

 

 

 

 

 

 

Creative Team Framed Memories Card

Creative Team Framed Memories Card

By Cheryl Peterie

 

Supplies:

Crafts4U A5 White 20 Pack 230gsm 60037

Crafts4U Die Layered Frame 1 (4 dies) 10195

Crafts4U Die Lacey Border 3 10161

Crafts4U 3mm x 4m Foam Tape 2mm Thick 30013

Crafts4U 6mm x 50m Double Sided Tape 30008

Little Birdie Curly Rose Yellow 12pk CR62800

Little Birdie Renae Blush 27pk CR63041

Little Birdie Renae Celeste 27pk CR63038

Little Birdie Micro Jeweled Florettes Classic Cream 60pk CR63277

Kaisercraft 12x12 Paper - Chartreuse

Kaisercraft Collectables Pack - Heirloom

Satin Ribbon 1/4"

 

Tools:

Basic tool kit (Crafts4U trimmer, scissors, Crafts4U double sided Tape, pencil, tweezers etc),Die Cutting/Embossing Machine, Washi Tape (for holding dies in place), Paper Distresser.

 

 

 

Instructions:

 

Fold & score a piece of A5 White card in half, Die cut the  Crafts4U Die Lacey Border 3 10161 along the right side of the card

 

Cut a background panel from the pattern paper(yellow side) to measure 8cm x 14.5cm, distress the edges, attach a piece of satin ribbon to the right side & attach to the card front.

(NB; with nesting dies No.1 being the smallest)

·         Nest & die cut the No.2 & No. 3 labels from the Layered Frame set (floral side of the above pattern paper)

·         Die cut the No.1 label (yellow side of pattern paper) Stamp your desired sentiment.

 

Mount the frame using Crafts4U 3mm x 4m Foam Tape 2mm Thick 30013 & attach to the card front.

 

From the Heirloom Collectables pack attach the stop watch inside the bottom left corner of the frame, the "Our Memories Will Last Forever" sentiment to the right side of the frame & the Remember banner to the top left corner of the card.

 

Attach the No.1 yellow label to the No.2 floral label & attach to the inside centre of the card.

 

Adhere a mix of small flowers & two leaves from the Little Birdie Curly Rose Yellow 12pk CR62800, Little Birdie Renae Blush 27pk CR63041, Little Birdie Renae Celeste 27pk CR63038 flower packs to the card front, then tie a small bow from the satin ribbon & adhere under the flowers to the bottom of the frame.

 

 

 

 

 

 

 

 

 

 

 

Creative Team - In the Garden Step Card

Creative Team - In the Garden Step Card

by Creative Team Member Cheryl Peterie

 

Supplies:

Spellbinders Card Creator Step Card Gift Of Happiness S7203

Crafts4U Die Garden Scene 10119

Crafts4U Die Stacking Tags (11 dies) 70060

Crafts4U 6mm x 50m Double Sided Tape 30008

Crafts4U 12mm x 4m Foam Tape 2mm thick 30004

Crafts4U A5 White 20 Pack 230gsm 60037

Little Birdie Micro Jeweled Florettes Classic Cream 60pk CR63277

Kaisercraft Paper Pad 6.5 X6.5in 40/pk Pen & Ink PP1041

Pen & Ink Collectables Cardstock Die Cuts CT934

Kaisercraft 12" x 12" Cardstock - Mocha & Brown

Distress Pad Peacock Feathers

Distress Pad Peeled Paint

Portacraft Ribbon

 

Tools:

Basic tool kit (Crafts4U trimmer, scissors, Crafts4Udouble sided Tape, Crafts4U Foam Tape, pencil, tweezers etc), Glue, Washi Tape (for holding dies in place), Die Cutting Machine.

 

 

 

 

Instructions:

 

First die cut the Spellbinders step card template on to the Mocha cardstock fold & score all the marked lines

 

Locate the background paper & the "Happy Birthday" sentiment from the Pen & Ink Paper Pad & the "Remember" sentiment from the Pen & Ink Collectables Pack.

 

Die cut the rectangle panel from the Spellbinders card creator set & the No.2 Tag from the Crafts4U Stacking Tags Set as pictured (NB: leaving the space next to the tag for bird house & the birds wings). From the same paper using a paper trimmer cut three panels measuring (front step 2cm x 8cm), (middle step 3.1cm x 8cm) & (back step 4.3cm x 8cm) & attach all panels to the step card. Die cut the tree, bird house base & roof from a piece of brown cardstock & assemble the bird house.

From a piece of leftover background paper pre-colour with Distress Inks - Peeled Paint & Peacock Feathers, die cut several leaves & two birds adhering the wings on to the front of the birds.

From a piece of A5 White card die cut two of the picket fence cutting one in half as shown in picture, using glue adhere the tree to the left panel then all of the fence pieces.

 

 



This is all the pieces ready to assemble

 

Adhere the leaves & five flowers over the tree, then four flowers along the front fence, attach the floral tag & the "Remember sentiment to the back step with one flower then using foam tape mount the birds & bird house to the left panel.

 

Created By: Cheryl Peterie for Catchy Crafts